F3x.com Electrics

Item	Specs	Required / F3X recommends	Price
ARF Electric models
	Typhoon 3D RTF Electric 3D in a box! 72mhz transmitter, brushless motor, ESC, Battery, Servos, Receiver, Charger, 2 props all INCLUDED. Z foam wing (like EPP) 2-piece removable wing. Ready to fly, in 15 minutes!	This thing RIPS! Out of the box in the air in the time it takes to charge the battery, if you ever wanted a 3D model get this one! There is nothing less expensive for what you get anywhere else. If you want to upgrade anything go with the 3S 2100 Lipo and get one of the Lipo chargers listed below.	$219.00 in stock
	Mini Edge All wood ARF. 2-piece removable wing. Fiberglass cowl & wheel pants. Carbon fiber landing gear. 37.25" Span. 24oz flying weight w/2100 Thunder Power Li-Po. 6.61:1 Gearbox &12 x 6 prop inc. No motor.	4 JR 241 servos Park 400 4200Kv motor Thunder Power 2100 3s gen2 Li-Po. E-flight 20amp brushless speed control. JR 610UL 6 ch receiver.	$99.99 in stock
	Mini Funtana All wood ARF. 2-piece removable wing. Fiberglass cowl & wheel pants. Carbon fiber landing gear. 37" Span. 24oz flying weight w/2100 Thunder Power Li-Po. 6.61:1 Gearbox &12 x 6 prop inc. No motor.	4 JR 241 servos Park 400 4200Kv motor Thunder Power 2100 3s gen2 Li-Po. E-flight 20amp brushless speed control. JR 610UL 6 ch receiver. LOOK! JR 6102 w/4 241 servos & R610UL (7 gram) 6ch rx for $239.99 Perfect outfit for the Mini Funtana!	$89.99 In Stock
	Harrier 3D Wing span - 48.4 inches Lenght - 57 inches Wing area - 751 sq in Flying weight (Approx) - 5.5 - 6lbs glow. Engine size - 46 - 52 2-Stroke 52 - 72 4Stroke 2-piece wing	Perfect for E conversion, lightweight and very cool looking!	$149.99 In Stock!

	YAK 50 3D ARF Flying Weight: 12 - 14 oz (340 - 400 g) w/ Battery Wing Area: 345 sq in (22.2 sq dm) Overall Length: 37.5 in (950 mm) Wing Span: 37 in (940 mm)	Park 370 IR or Park 400 OR motor. 1350TP 3s lipos E-flite 20a ESC. E-flite S75 servos! JR 610UL RX	$59.99 in stock
	Ultimate Pre cut profile ARF. 28" Span. Flying weight 10oz ~ 12oz w/Lipo 370 motor with 6.6:1 gearbox & 12 x 6 prop inc.	3ea. 4.7g micro servos. 15oz torque req. 1ea. 3s 860mah Thunder Power gen2 Li-Po. 10~15 amp speed control Brushless: Park 370 motor E-flight 20amp brushless speed control.	$49.99 in stock
	Tribute Pre cut profile ARF. 37" Span. Flying weight 10oz ~ 12oz w/Lipo 370 motor with 6.6:1 gearbox & 12 x 6 prop inc.	3ea. 4.7g micro servos. 15oz torque req. 1ea. 3s 860mah Thunder Power gen2 Li-Po. 10~15 amp speed control Brushless: Park 370 motor E-flight 20amp brushless speed control.	$44.99 in stock
	Tensor 4D Pre cut profile ARF. Pre painted. 27" Span. Flying weight 8oz ~ 9oz w/Lipo No motor inc.	Brushless: Outdoors: Park 370 1080 Out Runner 3ea. 4.7g micro servos. 15oz torque req. 1ea. 3s 860mah Thunder Power gen2 Li-Po. 10~15 amp speed control Indoor, light wind: Park 370 Out Runner 1360Kv 1ea. 2s 860mah TP Li-Po.	$54.99 in stock
The Tensor will truly teach you the axis of flight, roll is roll, yaw is yaw and pitch is pitch and they are not mixed! This model flies more like a similutator than a airplane. It is amazing! Flies on knife edge all day. Knife edge loops in 5 ft!
Flight Packs:
#1 For Mini Funtana/Mini Edge 4ea. JR241 servos. 1 E-Flite 20 amp ESC 1 JR 610UL 6ch rx (7 grams) 1 TP 2100 3s Li-Po 2ea. 6" servo extensions. 2ea 12" servo extensions. Deans Ultra plugs $ 309.00	#2 For Ultimate & Tribute 1 E-Flite 370 Brushless Motor 1 Castle Creations Phoenix 10 ESC. 4ea. HS55 micro servos 1 JR610UL 6 ch rx 7g. 1 TP 860 3s Li-Po. Deans mini plugs $269.00	#3 For Tensor 1 Park 370 1080Kv Out Runner Brushless motor. 1 JR610UL 6ch rx 7g. 1 APC 10x4.7SF prop 1 Castle Creations Phoenix 10 ESC. 3ea. HS55 Micro servos. 1 TP 860mah 3S Li-Po. Deans Mini plugs $259.00
Brushless motors
	POWER 60 OR Recommended Prop Range: 14x8 to 16x10 Voltage: 18.5 to 28.8 RPM/Volt (Kv): 400 Resistance (Ri): .06 ohms Idle Current (Io): 2.7A Shaft Diameter: 6mm (.24 in) Weight: 380 g (13 oz) Diameter: 50mm (2 in) Length: 62mm (2.4 in) Continuous Current: 40A Maximum Burst Current: 60A Cells: 16-24 Ni-MH/Ni-Cd or 5-7S Li-Po Speed Control: 80A Brushless	1200 watts of power! Put this in your Harrier 46 3D! Will pull 7Lbs of 3D vertical & hover!	$129.99 In Stock!
	Park 450 OR Prop Range: 9x6 to 11x3.8 Slow Flyer or 10x5 to 12x6 ElectricVoltage: 7.2 - 12 RPM/Volt (Kv): 890 Resistance (Ri): .20 ohms Idle Current (Io): .69A @ 8V Shaft Diameter: .16 in (4mm) Weight: 2.5 oz (72 g) Diameter: 1.1 in (28mm) Length: 1.3 in (33mm) Continuous Current: 12A Maximum Burst Current: 18A for 15 seconds Cells: 2-3 Li-Po or 6-10 Ni-Cd/Ni-MH Speed Control: 20A Brushless ESC	Ideal for 3D park flyers 15- to 25-ounce and scale park flyers 20- to 30-ounces using 2S - 3S 1200–2100mAh Li-Po battery packs	$64.99 in stock
	Park 400 OR Recommended Prop Range: 9x7 to 11x4.7 RPM/Volt (Kv): 920 (rpms per volt) Resistance (Ri): .1 ohms Idle Current (Io): .7 @10V (no load current) Shaft Diameter: 3.17 mm (1/8") Weight: 2 oz (56g) Diameter: 1.1 in (28mm) Continuous Current: 10A Maximum Burst Current: 13A Cells: 6-10 NiCd/NiMh or 2-3 LiPo Speed Control: 10 - 20 Amp Brushless	Slotted 12-pole outrunner design Prop adapter and gold-plated connectors included Motor mount included Excellent motor for small 3D and scale park flyers 10 oz - 20 oz (280 g - 560 g) Replacement for Speed 370 and Speed 400 applications	$59.99
	Park 400 IR 2 models available: RPM/Volt (Kv): 4200 kV Resistance (Ri): .24 ohms Idle Current (Io): 1.8A @ 10V RPM/Volt (kV): 3700 kV	This is the best motor for the Mini Funtana. Unlimited vertical and 15 minutes of run time w/2100 TP Li-Po.	$54.99 in stock
	Park 370 IR 2 models available: RPM/Volt (kV): 5400 kV Resistance (RI): .12 ohms Idle Current (Io): 1.3A @ 10V RPM/Volt (kV): 4100 Resistance (RI): .1 ohms Idle Current (Io): 1A @10V Shaft Diameter: 2mm E-Flight/GWS Gearbox mount inc.	Upgrade the Ultimate or Tribute with the E-Flite 370 4100Kv for eXtreme 3D! Great motor for the GWS Formosa and other GWS models. Best for 10 to 18oz models.	$47.99 in stock
	Park 370 OR 2 models available: Size: 28mm (1.1 in) x 25mm (1 in) RPM/Volt (kV): 1360 kV Resistance (RI): .1 ohms Idle Current (Io): 1A @ 10V Weight: 45 g (1.6 oz) Size: 25mm (1 in) x 28mm (1.1 in) RPM/Volt (kV): 1080 kV Resistance (RI): .19 ohms Idle Current (Io): .7A @ 10V Weight: 45 g (1.6 oz)	Use the 1080 kV on the Tensor w/3s 870 ThunderPower Li-Po or the 1360Kv w/2s 860 ThunderPower Li-Po for indoor or no wind. Great for 7 to 14oz models.	$49.99 in stock
	E-Flight brushless Speed control. Available in 20 and 40 amp.	A price breakthrough in quality Brushless components!	$41.99 20amp $54.99 40amp In Stock
E-Flite Gold plated 3.5mm billet connectors.	3 Male & 3 Female included		$ 5.00
Deans Micro connectors	Polarized 2 pin 1set M/F		$2.50
Deans Ultra Plug	1 set M/F		$4.50
Li-PO Chargers
	Multiplex LN-5014 Charge Cells Lithium 1-5 cells Li-Poly (3.6/3.7V) Charge cells NiCd/NiMH 1-14 cells NiCd/NiMH Charge Rate 0.1-5.0A Charge Voltage 1-20V Discharge Rate 0.1-1.0A Voltage Detection Automatic/Manual Chemistry NiCd/NiMH, Li-Poly/Li-Ion Input Power 11-15V DC, 6A Dimensions 4 1/2 x 3 1/2 x 1/2'' Weight 9.4oz Includes Power Leads - Banana Charge Leads - Banana , Bullet	Great easy to use all around charger for your TX, RX and Park Flyers. 2 line display is easy to read and understand. You can chg/dis chg/cycle and condition all your batteries. Get one!	$79.95 in stock
	Charges 1-, 2- or 3-cell Li-Po packs only Selectable 250mA, 500mA, 1A, 1.5A and 2A rates Selectable between 1, 2 or 3 cells Automatically detects cell count selection errors Convenient LED and audio displays Includes banana plugs with JST charger lead	A good Li-Po specific charger for the money!	$44.99 In stock
	Schulze Isl 6-330d It does it all! Ni-Cd, Nimh, Li-Lo, Limn, Lipo, PB &gell cells.	Buy the best and buy only once! Save money!	$219.00 IN STOCK

Thunder Power gen2 cells
Battery	Max Continuous Discharge/Burst	Max Continuos Current/Burst	Series (S) / Parallel (P)	Dimensions WxLxH(in)	Weight (oz)	Wire ga. / Charge protection?	Price
860mah 2 cell 7.4v	10C/15C	9A/13A	2S	1.35 x 2.5 x .40	1.5	20w/JST/No	$29.95
860mah 3 cell 11.1v	10C/15C	9A/13A	3S	1.35 x 2.5 x .60	2.2	20w/JST/No	$41.95
1320mah 2 cell 7.4v	12C/15C	15A/20A	3S	1.35 x 2.5 x .55	2.2	16/No	$35.95
1320mah 3 cell 11.1v	12C/15C	15A/20A	3S	1.35 x 2.5 x .80	3.1	16/No	$52.95
2100mah 2 cell 7.4v	12C/15C	25A/32A	2S	1.35 x 3.9 x .55	3.5	16/No	$54.95
2100mah 3 cell 11.1v	12C/15C	25A/32A	3S	1.35 x 3.9 x .80	5.2	16/No	$79.95
Note! Battery specs may change. Please call for latest info. WARNING! Li-Po batteries require a specialized charger designed for these cells. Improper charging or use may cause the cells to explode!