Specs:

Mini NYX Slope and Electric version. The MN uses the same airfoil as the 126" NYX F3B model and modified wing planform. The fuse is glass with a ballast tube installed. I -piece v-tail bolts on with a single screw from the bottom, the pushrods are pre installed for the slope version. The wing is glass/balsa/glass with a molded carbon spar.

Every control surface is hinged and wipers installed. Just install the radio equip and fly. I recommend the new Hitec 125MG wing servo for the ailerons because the wing is very thin at the servo location.

Light, fast and responsive.....The mini NYX.